Bambu PLA Matte 3D print sample in Ivory White
اللون

Apple Green, Ash Gray, Bone White, Caramel, Charcoal, Dark Blue, Dark Brown, Dark Chocolate, Dark Green, Dark Red, Desert Tan, Grass Green, Ice Blue, Ivory White, Latte Brown, Lemon Yellow, lilac purple, Mandarin Orange, Marine Blue, Nardo Gray, Plum, Sakura Pink, Scarlet Red, Sky Blue, Terracotta

Bambu Lab Filament PLA Matte

SKU: N/A
موجود

19.990 د.ا

ميزات المنتج

  • Elegant Matte Finish – Significantly Reduces Visible Layer Lines
  • 25 Muted, Curated Colors Available
  • Print Speeds Up to 270 mm/s Without Extra Tuning
  • Low Emissions – Certified to UL GREENGUARD (UL 2904)
  • RFID-Tagged for Automatic Profile Detection with AMS
  • Biodegradable – Diameter: 1.75 mm ± 0.03 mm

اطلب عبر الواتساب
إضافة إلى مفضلة
إضافة إلى مفضلة

هل أعجبك هذا المنتج؟ أضفه إلى المفضلة الآن وتابع المنتج.

إضافة إلى مفضلة
إضافة إلى مفضلة
يكون السؤال ؟ لديك الأنشطة اتصل علينا

📞اتصل الان اتصل الان

الدفع عند التوصيل

نقدا عند التسليم

جميع القطع مكفولة

جميع أجزاء هي مضمونة

مهندسون محترفون للصيانة

المهندسين الخبراء في الخدمة

Categories: , ,
Tags:

الوصف

Bambu Lab Filament PLA Matte

Discover Bambu PLA Matte: Elegant, Layer-Line-Free Prints, Now in Amman

Bring a refined, non-glossy finish to your prints with Bambu PLA Matte, available now in Amman, Jordan. It significantly reduces visible layer lines for a smooth, sophisticated surface — ideal for design projects, architectural models, figurines, and display pieces. Choose from 25 soft, muted colors that pair beautifully with the matte texture.

Why Choose Bambu PLA Matte?

  • Elegant Matte Finish: Cuts visible layer lines for a smooth, refined surface straight off the plate.
  • Curated Muted Palette: 25 soft, elegant colors suited to art, fashion props, and décor.
  • Fast & Easy to Print: Delivers premium results at speeds up to 270 mm/s without extensive tuning.
  • Low Indoor Emissions: Certified to UL GREENGUARD (UL 2904) — particle and VOC emissions measure below an average kitchen or living room.
  • RFID Smart Printing: Printing parameters are embedded on the spool’s RFID chip and read automatically by the AMS.
  • Beginner Friendly: Consistent, reliable results with minimal calibration.

Available Colors

Ivory White · Bone White · Ice Blue · Sky Blue · Marine Blue · Dark Blue · Ash Gray · Nardo Gray · Charcoal · Lemon Yellow · Mandarin Orange · Scarlet Red · Dark Red · Sakura Pink · Lilac Purple · Plum · Apple Green · Grass Green · Dark Green · Terracotta · Caramel · Desert Tan · Latte Brown · Dark Brown · Dark Chocolate

🔧 Bambu PLA Matte – Full Technical Specifications

ميزة مواصفات
مواد للطباعة PLA (matte finish)
Diameter 1.75 mm ± 0.03 mm
Net Weight 1 kg per spool
Spool Material ABS (heat resistant to 70°C)
Spool Size 200 mm diameter × 67 mm height
Recommended Nozzle Sizes 0.2 / 0.4 / 0.6 / 0.8 mm
Nozzle Temperature 190 – 230°C
Bed Temperature 35 – 45°C
Bed Type Cool Plate, High Temperature Plate, or Textured PEI Plate
Max Print Speed Up to 270 mm/s (0.4 mm nozzle / 0.4 mm line width / 0.2 mm layer height)
Drying (if needed) Blast drying oven: 50°C for 8h, or X1-series heatbed: 60–70°C for 12h
Storage Humidity < 20% RH, sealed with desiccant
Compatibility All Bambu Lab printers and AMS series
Certification UL GREENGUARD (UL 2904) – low indoor emissions

🧠 Good to know:

  • Biodegradable under industrial composting conditions
  • RFID tag auto-loads the correct print profile when used with an AMS
  • Dry before use for the most consistent finish; store in a dry environment after opening

Bambu Lab Filament PLA Matte

Bambu PLA Matte Technical Data Sheet (TDS)

 

معلومات إضافية

اللون

Apple Green, Ash Gray, Bone White, Caramel, Charcoal, Dark Blue, Dark Brown, Dark Chocolate, Dark Green, Dark Red, Desert Tan, Grass Green, Ice Blue, Ivory White, Latte Brown, Lemon Yellow, lilac purple, Mandarin Orange, Marine Blue, Nardo Gray, Plum, Sakura Pink, Scarlet Red, Sky Blue, Terracotta

المراجعات

لا توجد مراجعات بعد.

يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.